Product Details

Directions

Directions for use
Read ALL information on this pack and follow instructions CAREFULLY before use. Use only as directed. Direct device spray nozzle away from your face at ALL TIMES and during set up procedure below.
Retain these instructions for future reference.
1. Lift the lid to open (diagram 1). Ensure the control knob is in the off position (single dot marking). To open, hold the base in one hand and the top with the other, twist anticlockwise and lift.
2. Insert the aerosol refill in the device base. Place the top half of the device on the base ensuring the refill spray nozzle is facing out through the opening at the front of the device (diagram 2). Rotate top of the device clockwise to "click" into closed position. When closed the lines on front and back of the device are aligned.

ALWAYS DIRECT DEVICE AWAY FROM FACE

3. Lift the lid open (diagram 3). Ensure the control knob is in the OFF position (single dot marking). Insert 1 AA batteries (diagram 3). Ensure the positive (+) and negative (-) terminals are aligned correctly.
4. Select desired fragrance intensity (diagram 4) using the control knob (low, medium, high line markings). Replace device lid by gently pushing it down into the closed position. When activated, the device will automatically spray after a delay of about 15 seconds. If there's no spray, switch off the device: a. Check that battery is inserted correctly. b. Check refill is inserted with spray nozzle facing out and device closed properly.
5. With device pointing away from face, place it in the desired position at a height of at least 2m from the floor level (diagram 5), facing away from the wall and polished/coated surfaces. If product comes in direct contact with polished or coated surfaces wipe immediately with a damp cloth.

NOTE: Change aerosol refill when fragrance is no longer emitted. Ensure the control knob inside the top lid (diagram 4) is in the OFF position (single dot marking), replace the refill (directions 1-4 above) and select your chosen fragrance intensity level.

Disclaimer

Information provided on this page is supplied to assist our customers to select suitable products. However, products and their ingredients are liable to change at short notice, which may affect nutritional, country of origin, ingredient and allergen information. Therefore, you should always check product labels before consuming. If you require specific information to assist in your purchasing decision, we recommend that you make further enquiries of the manufacturer (see contact details on the packaging) or contact us on 0800 404040.