MENU
China
Store in a cool, dry place.
1. Ensure surfaces to be bonded are clean, dry, free of dust, and close fitting.
2. Hold bottle in an upright position. Pierce seal by attaching nozzle and cap and turning clockwise.
3. Remove cap and squeeze gently to apply one drop at a time to one surface only. Hold down the dispenser button for a bead of glue. Do not over apply. Bring surfaces together and apply slight pressure (30 seconds). Allow 30 minutes to provide sufficient bond strength for practical use. Maximum bond strength reached after 12 hours.
4. Wipe nozzle clean with cloth or paper. Reseal cap in clockwise direction. Tap bottle lightly on surface to clear nozzle.
Information provided on this page is supplied to assist our customers to select suitable products. However, products and their ingredients are liable to change at short notice, which may affect nutritional, country of origin, ingredient and allergen information. Therefore, you should always check product labels before consuming. If you require specific information to assist in your purchasing decision, we recommend that you make further enquiries of the manufacturer (see contact details on the packaging) or contact us on 0800 404040.